How to Update Galaxy Grand Neo I9060 with Android 4.2.2 DDUAND1 Jelly Bean Official Firmware

Samsung Galaxy Grand Neo (GT-I9060) also known as Galaxy Grand Lite has received a new Android 4.2.2 Jelly Bean update with firmware build number I9060DDUAND1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9060DDUAND1
CSC: I9060ODDAND1
MODEM: I9060DDUAND1
Version: Android 4.2.2
Build date: Apr 02, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Grand Neo I9060 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Neo on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 DDUAND1 Jelly Bean firmware is compatible only with the Galaxy Grand Neo (GT-I9060). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Neo by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 DDUAND1 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Grand Neo I9060 with Android 4.2.2 DDUAND1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Neo.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Neo to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted I9060DDUAND1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Neo I9060 should be now updated with Android 4.2.2 DDUAND1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Neo I9060 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

How to Root Galaxy Grand Neo I9060 with Android 4.2.2 Jelly Bean Pre-Rooted Firmware

Samsung Galaxy Grand Neo (GT-I9060) users who wish to root their devices, may follow our step-by-step guide below.

This tutorial uses Pre-Rooted Stock Firmware released by Senior Member of XDA-Developers, balliboxer.

Features
- PreRooted
- Superuser
- Blotwares removed

Disclaimer: We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Grand Neo on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Pre-Rooted Firmware works only on the Galaxy Grand Neo (GT-I9060) also known as Galaxy Grand Lite. Applying this to any incorrect variant might brick the device. Verify the model number of the Grand Neo by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 Jelly Bean Pre-Rooted Firmware for Galaxy Grand Neo I9060
2. Odin 3.09

Steps to Root Galaxy Grand Neo I9060 with Pre-Rooted Firmware
Step 1: Extract Pre-Rooted Firmware and Odin 3.09 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Grand Neo. Then boot into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Grand Neo to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the AP button and select the Pre-Rooted Firmware .tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Neo I9060 is now rooted successfully. Open the app drawer of the phone and check for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: If the device is stuck in boot loop after Step 8, then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and choose Wipe Data/Factory Reset and Wipe Cache Partition. Finally, return to main recovery menu and select Reboot System Now. Please note that performing wiping task will erase your device internal memory data and not external SD card data.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

How to Update Galaxy Tab 3 Lite (Wi-Fi) SM-T110 with Android 4.2.2 XXUAND1 Jelly Bean Official Firmware

Samsung has rolled out another Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Tab 3 Lite with model number SM-T110 in Southeast Asian countries. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: T110XXUAND1
CSC: T110OLBANB1
MODEM: T110XXUAND1
Version: Android 4.2.2
Build date: Apr 08, 2014
Regions: Thailand, Indonesia, Malaysia, Philippines, Singapore, Vietnam

Samsung Galaxy Tab 3 Lite (Wi-Fi) SM-T110 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 Lite on the computer.
2. Enable USB Debugging Mode on your tablet by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The Android 4.2.2 XXUAND1 Jelly Bean firmware is compatible only with the Wi-Fi version of Galaxy Tab 3 Lite (SM-T110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 Lite by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUAND1 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Tab 3 Lite (Wi-Fi) SM-T110 with Android 4.2.2 XXUAND1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Tab 3 Lite.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 3 Lite to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted T110XXUAND1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Tab 3 Lite (Wi-Fi) SM-T110 should be now updated with the Android 4.2.2 XXUAND1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 Lite (Wi-Fi) SM-T110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

How to Update Galaxy Grand 2 DUOS SM-G7102 with Android 4.3 XXUAND1 Jelly Bean Official Firmware

Samsung Galaxy Grand 2 with dual SIM card slots (SM-G7102) has just received a new Android 4.3 Jelly Bean update with firmware build number G7102XXUAND1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: G7102XXUAND1
CSC: G7102ODDAND1
MODEM: G7102DDUAML3
Version: Android 4.3
Build date: Apr 08, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Grand 2 DUOS SM-G7102 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.3 XXUAND1 Jelly Bean firmware is compatible only with the Galaxy Grand 2 DUOS (SM-G7102). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand 2 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUAND1 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Grand 2 DUOS SM-G7102 with Android 4.3 XXUAND1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted G7102XXUAND1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand 2 DUOS SM-G7102 should be now updated with Android 4.3 XXUAND1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand 2 DUOS SM-G7102 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

How to Update Galaxy Note 3 (LTE) N9005 with Android 4.4.2 XXUEND3 KitKat Official Firmware

Samsung has just released a new Android 4.4.2 KitKat update for the Snapdragon variant of Galaxy Note 3 with model number SM-N9005. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N9005XXUEND3
CSC: N9005PHNEND1
MODEM: N9005XXUENC2
Version: Android 4.4.2
Build date: Apr 14, 2014
Regions: Netherlands

Samsung Galaxy Note 3 (LTE) N9005 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Netherlands can now download and install the same manually, using our step-by-step guide below.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.4.2 XXUEND3 KitKat firmware is compatible only with the LTE version of Samsung Galaxy Note 3 (SM-N9005). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.4.2 XXUEND3 KitKat Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Note 3 (LTE) N9005 with Android 4.4.2 XXUEND3 KitKat Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted N9005XXUEND3 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 3 (LTE) N9005 should be now updated with Android 4.4.2 XXUEND3 KitKat official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 3 (LTE) N9005 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.