This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 10.1 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
1. Install USB Driver for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the note by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked.
5. Ensure the battery of the note is charged more than 80 percent.
6. The CF-Auto-Root file works only on the Wi-Fi version of the Galaxy Note 10.1 2014 Edition (SM-P600). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.
1. CF-Auto-Root for Galaxy Note 10.1 2014 Edition (Wi-Fi) P600 (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip)
2. Odin 3.07 (Mirror Link)
Steps to Root Galaxy Note 10.1 2014 Edition (Wi-Fi) P600 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 10.1. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your note will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Samsung Galaxy Note 10.1 2014 Edition (Wi-Fi) P600 running on Android 4.3 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.